WATER TREATMENT COMPONENT

DKS Special Cleaning Agent for Reverse Osmosis Membranes

Product Performance and Application DKS reverse osmosis membrane cleaning agent is a formulated cleaning agent. It is used to dissolve metal hydroxides, calcium carbonate and other types of scale, and is suitable for aromatic polyamide reverse osmosis membranes, hollow fiber membranes, as well as nanofiltration (NF) and ultrafiltration (UF). Excellent cleaning results can extend the […]

MOQ

10

Product Details

Product Introduction

Review the product description and confirmed technical data before selecting a model.

Product Performance and Application
DKS reverse osmosis membrane cleaning agent is a formulated cleaning agent. It is used to dissolve metal hydroxides, calcium carbonate and other types of scale, and is suitable for aromatic polyamide reverse osmosis membranes, hollow fiber membranes, as well as nanofiltration (NF) and ultrafiltration (UF). Excellent cleaning results can extend the service life of the membranes. Product features
(1) The DKS reverse osmosis membrane cleaning agent is suitable for all brands of aromatic polyamide membranes; (2) The liquid agent can shorten the mixing time;
(3) Low foam formula; (4) Reusable;
(5) The reverse osmosis cleaning agent is a low pH liquid formula used to remove metal hydroxides, calcium carbonate and other types of scale.

Usage instructions:
(1) Inspect the cleaning water tank, pipelines, and security filter. If necessary, replace with new filter elements;
(2) Mix an appropriate amount of the chemical agent with water and inject it into the cleaning tank;
(3) Gradually add the calculated dosage of the chemical agent. Use a water pump to circulate and mix the chemical solution. Measure the pH value to be between 2.0 and 3.0 (alkaline range is 10-12);
(4) Perform a continuous cleaning process. Measure the pH value every 5-20 minutes. When the pH value changes, add a certain amount of cleaning agent until the pH value no longer continues to rise or fall, indicating that the cleaning is complete.
(5) If the contamination is severe, sometimes it is necessary to completely empty the first batch of cleaning agent to prevent the re-deposition of contaminants. Then, reconfigure the cleaning solution;
(6) During the cleaning process, pay attention to the increase in temperature. Do not exceed the specified temperature. The usual dilution ratio is 10% of the entire cleaning solution. Packaging
The packaging of the DKS series reverse osmosis membrane cleaning agent upon leaving the factory: each barrel contains 25KG (blue barrel). The storage location should be kept well-ventilated and dry. The storage period at normal temperature is 1 year.
Safety and Protection
The DKS reverse osmosis membrane-specific cleaning agent is weakly acidic or alkaline. During operation, pay attention to labor protection. Avoid contact with skin, eyes, etc. In case of accidental contact, rinse with plenty of water.

MOQ 10

Product Documentation

FAQ

Frequently Asked Questions

What information should I provide before ordering?
Please provide the required model or size, quantity, operating conditions, connection details and intended application. Our team will check the available configuration against your project requirements.
Can the product specification be customized?
Available customization depends on the product type and order quantity. Please send the required dimensions, material, pressure rating, connection type or branding requirements for confirmation.
What is the minimum order quantity?
Minimum order quantity and sample availability vary by model. Please contact our sales team with the product name and required quantity for confirmation.
Can you provide technical documents or installation support?
Available drawings, datasheets and installation information can be provided after the exact model and configuration have been confirmed.

Request a Technical Quote

Send your model, size, quantity and operating requirements. Our team will review the information and recommend a suitable configuration.

  • ✓ Product compatibility confirmation
  • ✓ Technical specification support
  • ✓ Quantity and export quotation
  • ✓ OEM project discussion

Need Help Confirming Compatibility?

Send us the required model, size, operating conditions and quantity. We will review the information before quotation.